LMS-P
Special features
» High specific power
» Low "cogging"
» Little mass
» compact design
» Minimal electrical losses
Description
The primary unit
of LMS-P35 and LMS-P58 is equipped with multi-phase iron-core winding.
Due to a patented geometry of the magnetic circuit these motors have a
high specific power, low "cogging", little mass and compact design.
The secondary unit
is equipped with permanent magnets. Secondary units are available in 6
different lengths (as shown in data-sheet). With these lengths every
requested length of stroke is realizable in steps of 32 mm (LMS-P35)
respectively 37 mm (LMS-P58).
A covering of stainless steele guarantees the mechanical protection of the magnets and makes cleaning easy.
Several primary units can be driven independently of one to each other on a single secondary unit.
The heat sink
with water cooling takes the heat off the application and increases the motor continuous loading capability (optional).
The shown data
are valid for fitting of the primary unit to a cooling area of adequate
size (minimal three times size of the installation surface, aluminium,
12 mm thick), a winding temperature of 130°C at an ambient
temperature of 20°C and natural ventilation.
LMS-P 35
| Type | Rated force without water-cooling [N] |
Maximum force [N] | Primary unit dimensions (LxWxH) [mm] |
| LMS-P35-017/160 | 53 | 210 | 184 x 044 x 25 |
| LMS-P35-035/160 | 130 | 430 | 184 x 064 x 25 |
| LMS-P35-052/160 | 200 | 640 | 184 x 084 x 25 |
| LMS-P35-035/320 | 240 | 870 | 344 x 064 x 25 |
| LMS-P35-070/160 | 280 | 870 | 184 x 104 x 25 |
| LMS-P35-052/320 | 380 | 1.290 | 344 x 084 x 25 |
| LMS-P35-105/160 | 440 | 1.300 | 184 x 139 x 25 |
| LMS-P35-070/320 | 540 | 1.740 | 344 x 104 x 25 |
| LMS-P35-140/160 | 590 | 1.740 | 184 x 174 x 25 |
| LMS-P35-070/480 | 810 | 2.600 | 504 x 104 x 25 |
| LMS-P35-105/320 | 840 | 2.600 | 344 x 139 x 25 |
| LMS-P35-140/320 | 1.150 | 3.470 | 344 x 174 x 25 |
| LMS-P35-105/480 | 1.250 | 3.910 | 504 x 139 x 25 |
| LMS-P35-140/480 | 1.700 | 5.210 | 504 x 174 x 25 |
Secondary units are available in six different lengths (as shown in data-sheet).With these lengths every requested length of stroke is realizable in steps of 32 mm.
LMS-P 58
| Type | Rated force without water-cooling [N] |
Maximum force [N] | Primary unit dimensions (LxWxH) [mm] |
| LMS-P58-035/185 | 290 | 500 | 214 x 068 x 45,8 |
| LMS-P58-035/370 | 550 | 1.000 | 399 x 068 x 45,8 |
| LMS-P58-070/185 | 640 | 1.000 | 214 x 106 x 45,8 |
| LMS-P58-105/185 | 990 | 1.500 | 214 x 141 x 45,8 |
| LMS-P58-070/370 | 1.230 | 2.000 | 399 x 106 x 45,8 |
| LMS-P58-140/185 | 1.300 | 2.000 | 214 x 176 x 45,8 |
| LMS-P58-070/555 | 1.830 | 3.000 | 584 x 106 x 45,8 |
| LMS-P58-105/370 | 1.920 | 3.000 | 399 x 141 x 45,8 |
| LMS-P58-210/185 | 2.100 | 3.000 | 226 x 246 x 49,8 |
| LMS-P58-140/370 | 2.600 | 4.000 | 399 x 176 x 45,8 |
| LMS-P58-105/555 | 2.840 | 4.500 | 584 x 141 x 45,8 |
| LMS-P58-140/555 | 3.900 | 6.010 | 584 x 176 x 45,8 |
| LMS-P58-210/370 | 4.100 | 6.010 | 411 x 246 x 49,8 |
| LMS-P58-210/555 | 6.000 | 9.010 | 596 x 246 x 49,8 |
Secondary units are available in 6 different lengths (as shown in data-sheet).With these lengths every requested length of stroke is realizable in steps of 37 mm.
Download product-flyer LMS-P
Download catalogue LMS-P [incl. complete data-sheets]